Vacuum Tubing
Glass Expansion PVC Pump Tube 2tag 1.02mm ID White/White, PKT 12, (3710034400, 5000-090, 5064-8028)
PVC Pump Tube 2tag 1.02mm ID White/White (PKT 12).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerSpecial Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide. For >35% Nitric Acid and >25% Hydrofluoric Acid we recommend using Viton P/N VS1.02-WHT.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Cole-Parmer Hose Barb Fitting, Tee Union, Natural Nylon, Cleanroom Packed, 3/8" ID; 10/Pk
Use these high-quality PVC-free fittings in biomedical, pharmaceutical, electronic, and other critical-use applications. Fittings are manufactured, double bagged, and sealed in an ISO Class 7 cleanroom to ensure that the integrity is not compromised. An ISO Class 7 cleanroom utilizes HEPA filtration systems to maintain air cleanliness levels of less than 10,000 particles of 0.5 µm or larger per cubic foot.
Easily combine or split fluid flow using tee unions. A single barb on each end of the fitting creates a tight seal to keep the tubing in place. These natural nylon fittings provide good tensile strength, stiffness, and impact resistance and are resistant to fuels and lubricants. Not recommended for use with phenols, strong acids, and oxidizing agents.
Foxx Life Sciences EZBio Vactrap S XL Vacuum Trap System (Vacuum Flask Alternative) for Aspiration & Vacuum Protection, Shatterproof 4L+2L Aspirator Bottle Assembly with Secondary Container, Autoclavable,Polypropylene, Inline Vent Filter, Sterile, 1/EA
EZBio Vactrap S is a sterile vacuum trap system for cleanroom bioprocessing, protecting vacuum lines, pumps, and personnel from hazardous liquids and biohazards. It safely contains waste from supernatant removal, chemical separation, and cell culture media aspiration. One bottle collects contaminated fluids for decontamination, while a second serves as overflow protection. A hydrophobic inline filter prevents aerosol spread.
Features
Pre-assembled, sterile, and double-bagged for cleanroom use
Secondary containment prevents spills and overflows
Shatterproof for enhanced safety
Wide-mouth design for easy cleaning
Tube holder prevents spills when not in use
EZBio HP vent filter with 0.2 µm PTFE membrane blocks bacterial aerosols
40 CFR 264.175 compliant
Applications
Cell culture media aspiration
Supernatant removal
Chemical separation in biopharma
Waste collection in high-purity processes
Safe biohazardous waste handling
Foxx Life Sciences EZLabpure™ Platinum-Cured Silicone Tubing, 10mm (25/64") ID X 18mm (45/64") OD, 25FT
EZLabpure™ Platinum-Cured Silicone Tubing is designed for general-purpose fluid transfer in food & pharmaceutical applications. Its smooth inner bore minimizes particle entrapment compared to peroxide-cured tubing, ensuring cleaner, more efficient flow. The tubing is developed to meet non-regulatory market requirements while maintaining high performance & reliability.
Features
Made from general-purpose platinum-grade silicone rubber.
Made & packaged in an ISO Class 7 certified cleanroom.
Smoother bore provides superior fluid transfer versus peroxide-cured tubing.
Offers better transparency & longer shelf life than peroxide tubing.
Free from heavy metals & hazardous substances.
Applications:
Peristaltic pump-based fluid transfer
Chemical & analytical analysis
Sanitary application
Food & beverages transfer
Certifications
NSF-51 Certification on Resin
FDA 21 CFR 177.2600
Phthalate/Bisphenol Free COA
TSE/BSE Certification
Cole-Parmer C-Flex 072 TPE Tubing, 3/8" ID x 9/16" OD, 50 Ft; Saint Gobain 072-375-3
Excellent heat seal and sterile weld capabilities make it ideal for biopharmaceutical applications
Easily meet the critical demands of pharmaceutical and biopharmaceutical applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress.
Accuflow Systems Saint-Gobain Tygon Tubing, TPE, 3/8 in ID, 50 ft
Tygon 2375 is a clear, chemical-resistant thermoplastic elastomer (TPE) tubing formulated for aggressive chemicals and low extractables. It is suitable for chemical transfer, cleaning systems, sampling lines, and dispensing applications where chemical resistance and media purity are required. Supplied in 50 ft lengths for equipment and process installations.
- Clear TPE construction with low extractables and low sorption.
- Formulation 2375 provides resistance to acids, bases, ketones, salts, and alcohols.
- Dimensions: 3/8 in ID, 1/2 in OD, 1/16 in wall; 50 ft length.
- Maximum working pressure 17 psi (1.2 bar); vacuum rating 29 inHg.
- Shore A hardness 75; temperature range -103 °F to 130 °F (-75 °C to 54 °C).
- Tensile strength 1900 psi and 850% ultimate elongation for flexibility and durability.
- Complies with FDA CFR 177.1520 and NSF-51 where applicable.
Ace Glass, Inc. ClearGreen; PVC tubing, 1/4in ID - 3/8in OD, Phthalate-Free, box/50 feet
6.4 X 1.6MM VINYL TUBING
World Precision Instrument Silicone Tubing with stops, 1.6mm ID
1m of #14 tubing with stops 1.6mm ID.
Vici Precision Sampling, Inc. 1/16 SS TUBING 0.040ID 50FT
1/16 SS TUBING 0.040ID 50FT. Please be advised that a small cut/clean charge will be added to the invoice per the supplier
Foxx Life Sciences EZLabpure™ Peroxide Cured Silicone Transparent Tubing, 10mm (25/64") ID X 16mm (5/8") OD, 25FT
EZLabpure™ Peroxide-Cured Silicone Tubing is designed for general, non-critical fluid transfer applications. This translucent tubing offers excellent flexibility and resiliency, making it ideal for peristaltic pump use in routine non critical processes.
Features
Made from high-quality peroxide-cured silicone rubber.
Manufactured and packaged in a dust-free facility.
Odorless and tasteless for clean fluid transfer.
Exhibits good compression set, tensile strength, and flex fatigue resistance to extend pump life.
Wide Temperature Range: Operational from –80°C to +230°C.
Applications:
Peristaltic Pump
Liquid filling and transfer in Pharma & Biopharma Industries
Food and Beverages Industries
Certifications
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life
FDA 21 CFR 177.2600 Certificate
Electron Microscopy Sciences Graphene Oxide 2 Layers on Silicon Nitride with 2.5 µm holes
Graphene oxide on silicon nitride with 2.5 um holes.
Type: 2 layers
Petroleum Analyzer Corporation TUBING, TEFLON, 1/8 , PRE-SHRUNK (4ft)
TUBING, TEFLON, 1/8", PRE-SHRUNK
AVANTOR MASTERFLEX (VWR LLC) TUBG TYG 2-STOP 0.89MM 12/PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL , 0.89 mm ID, 15IN L; 12/PK, Avantor